86-510-85389002 中文EN

NEWS

News Center

Stepper Motors,Stepper Motor Drivers,Servo Motors-Jiangsu Novotech Electronic Technology Co., Ltd

Contact Person:sherry

0510-85389006

Cooperation: CONTACT

0510-85389002

Address:A1-606,Tian'an Intelligent Park,No.228,Linhu Road, New District,Wuxi,Jiangsu,China

IC integrated hybrid stepper motor with driver built-in

IC integrated hybrid stepper motor with driver built-in

●Operating voltage: DC input voltage 15VDC to 50VDC,recommend working voltage 36V

●The max continuous output current is 8.2A, the max peak current is 13A (advanced overload capacity of step servo) 

●Using FOC magnetic positioning control technology and space vector pulse width modulation (SVPWM) closed-loop control technology

●Using advanced variable current technology and frequency conversion technology, effectively reducing heat and vibration of motor and driver

●The number of pulses per cycle (subdivision) can be set by the debug software or the dial switch setting,the max subdivision no.is 51200.

●The max pulse frequency of control instruction is 500KHz (factory default is 200KHz)

●Pulse, direction and enable signal input interface level is 4.5 to 28V compatible

●Performance: smooth speed, small overshoot ,good output strength in medium and high speed, small tracking error, low heat of motor and driver

IC integrated hybrid stepper motor with driver built-in.jpgintegrated close loop hybrid servo stepper system.jpgIC integrated hybrid stepper motor with driver built-in.jpgIC integrated hybrid stepper motor with driver built-in.jpg