Stepper Motors,Stepper Motor Drivers,Servo Motors-Jiangsu Novotech Electronic Technology Co., Ltd

产品资料下载

Three Axis Driver Drive for Three Motors

Character

3 in 1 driver can drive our 42/57/86 series stepper motors;
Three motors can independent supply 0.1-5.6A current;
Independent pulse/direction control,also can adjust double pulse control mode;
Subdivision and current settings set by dedicated software instead of DIP switch;
Simplify the motor wiring, especially suitable for three-axis platform control;
The driver inside has overvoltage, undervoltage, and overcurrent protection, the input and output control signals are used optical isolation.

Power supply		24 - 48 VDC
Output current		Set by debugging software, up to 5.6A(peak)
Current control		PID current control algorithm
Subdivision setting		Debug software setting, 200~65535
Speed range		Match the right stepper motor, can reach to 3000rpm
Resonance suppression		Automatically calculate the resonance point, suppress the intermediate frequency vibration
Parameter adaptation		The drive initialization automatically detects the motor parameters and optimizes the control performance
Pulse mode		Direction & pulse
Pulse filtering		2MHz digital signal filter
Idle current		The current is automatically halved after the motor stopped

Port function instruction

Function		Label	definition	Remark
Power input terminal		V+	imput DC power supply positive	DC power supply 24~48V
		V-	imput DC power supply negative
Motor 1		A1+	Connect A-phase winding both ends of motor 1
		A1-
		B1+	Connect B-phase winding both ends of motor 1
		B1-
Motor 2		A2+	Connect A-phase winding both ends of motor 2
		A2-
		B2+	Connect B-phase winding both ends of motor 2
		B2-
Motor 3		A3+	Connect A-phase winding both ends of motor 3
		A3-
		B3+	Connect B-phase winding both ends of motor 3
		B3-
15 pin control signal port	1	PUL1+	Motor 1 pulse port	3.3-24V compatible
	2	PUL1-
	3	DIR1+	Motor 1 direction port
	4	DIR1-
	5	PUL 2+	Motor 2 pulse port	3.3-24V compatible
	6	PUL 2-
	7	DIR 2+	Motor 2 direction port
	8	DIR 2-
	9	PUL 3+	Motor 3 pulse port	3.3-24V compatible
	10	PUL 3-
	11	DIR 3+	Motor 3 direction port
	12	DIR 3-
	13	ENA+	Enable signal port	3.3-24V compatible
	14	ENA-
	15	Empty